Toyota Techstream: Reference point for all new users

In the beginning, getting a personal working version of Techstream up and running was a tricky trial and error process. With more experience, some of the difficulties have been worked out. Fortunately for those just joining the group, it’s easier now. But through the research process, you might not realize this. Here is the most basic start to finish setup process to save time and redundant Q&A exchanges.

First: Check 32 or 64 bit windows 7/ XP and decide if you’re installing this software

Decide if you’re installing this software on a 32 bit or 64 bit system. Some of the cables only have 32 bit drivers available, but tweaking the files to install them on 64 bit systems is possible if your abilities allow it. Depending on your confidence level and computer knowledge, your choice may already be made.

1) To find out if your computer is running a 32-bit or 64-bit version of Windows in Windows 7 or Windows Vista, do the following:
Open System by clicking the Start button Picture of the Start button, right-clicking Computer, and then clicking Properties.
Under System, you can view the system type.

2) If your computer is running Windows XP, do the following:
Click Start.
Right-click “My Computer” and then click Properties.

If you don’t see “x64 Edition” listed, then you’re running the 32-bit version of WindowsXP.

If “x64 Edition” is listed under System, you’re running the 64-bit version of Windows XP.

For the easier setup, go with a 32 bit windows system, a 64 bit system that you can run a 32 bit virtual machine on, or get one of the cables that have 64 bit drivers available. The simplest gig would be to find an old 32 bit XP laptop, or fork over another week’s allowance for a Mangoose MFC so you can use Techstream on a 64 bit laptop easily. The descriptions for the cables and the available drivers for each are below. This decision will dictate which cable is best for you.

Second: Get yourself a cable, E.G Toyota Techstream 

Get yourself a cable. Getting Techstream won’t do you any good without something to connect to a car. The cable you choose will set the stage for what extra work will be necessary to get the Techstream software functional.

Drew Technologies Mongoose Pro MFC – Most expensive, but most likely highest quality and best supported of all aftermarket cable options. It will be any cable looking like this that you can find by searching for Mangoose Toyota Techstream etc on well-known B2C sites and Personal sites E.G 32 and 64 bit driver downloads are available on the manufacturer’s website as well as in my link later in this post making for easy setup on any computer.
Drew Technologies Mongoose MFC (not Mongoose Pro) – Originally used by dealerships for Techstream Lite, they range in price from $50ish to about as much as about $400-500 depending on who is selling it and how ignorant they are about the item they have. Under $100 MINI VCI is an awesome price for any original Mongoose MFC though. 32 and 64 bit driver downloads are still available on the manufacturer’s website as well as in my link later in this post making for easy setup on any computer.

Chinese MVCI – Most commonly used in forums. These cables all look mostly the same although the font on the sticker seems to switch between normal and italic depending on where it’s made, but they all usually say the same stuff on the label (Mini-VCI J2534 Standard OBDII Interface). Tons of these from all over the place (mostly China/Hong Kong) can be found on the well-known B2C sites and Personal sites E.G  by just searching for Techstream. The available driver for these cables requires 32 bit system only. To tweak the files for 64 bit installation, refer to this thread post: (Solution) Mini VCI + Toyota TIS Techstream 8.x on Windows 7/8 64-bit. – Toyota 4Runner Forum – Largest 4Runner Forum
If this is within your abilities, this is the most affordable cable and can be used on 32 bit and 64

XHorse MVCI – More affordable than the Mangoose products. The Chinese MVCI cable is a clone of the guts of this XHorse cable which is why their cables come with a disc with XHorse drivers.
All of these cables have been used by experienced DIY Techstream users and information for setting them up is readily available throughout this thread as well as in the instructions below.
Third: Find Techstream software

Now you need the software. Techstream software can be found all over the place, and there are many versions floating around in the various Techstream threads in different forums. The version updates are simply bug fixes and new model support. With bug fixes and version updates, new bugs arrive, so the biggest benefit to the newer versions is simply model support. The current latest version supports all models through 2014.

Here (hopefully) is a consolidated source for the software as well as simple setup instructions and common cable drivers:

Toyota Techstream V9.30.002 download:

If this link doesn’t work, the availability of Techstream software is still pretty good. The sources for downloading it change, drop, respawn elsewhere and so on and so forth. You no longer need the patch files, TISKEY files or anything else to activate the software. Just follow the instructions below. Digging through the forum threads for links to download is the best start for the software if you can’t get it here.

Fourth: Techstream Setup Instruction

Put it together, this is information from the file available above but included here as a clean walk through.

Setup Instructions for 32 bit MVCI, 32 bit XHORSE, and 32 or 64 bit Mangoose
Please make sure your windows system is 32bit(Windows xp or 7) or that you have a Mangoose cable in which case you’ll have the 32 or 64 bit driver for your cable as needed and these instructions will work fine, or refer here: (Solution) Mini VCI + Toyota TIS Techstream 8.x on Windows 7/8 64-bit. – Toyota 4Runner Forum – Largest 4Runner Forum for 64 bit MVCI/XHORSE cable installation instructions.

step1. Install “TIS_Techstream_Setup.exe”

step2. After the installation, don’t run the Techstream software.

2.1 Install the cable driver for whichever cable you’re using such as MVCI (xhorse) driver or Mangoose cable driver.
2.2 If you ran the MVCI driver, this step will probably not be necessary, but other cable drivers may require you to change Techstream Function value. Now is the time to check the function setting by following these instructions:

To activate any version of techstream, install whichever techstream .exe you choose, then open My Computer, C: Program files\Toyota Diagnostics \Techstream\Env

open IT3System.ini file and scroll down to


Switch TISFunction=1 to TISFunction=0

Click File, and Save.

step3. Now run the Techstream software. Again in this case, the MVCI driver may bypass this, or if you opened Techstream before installing those drivers, these fields may show up. If they do:
3.1 Select any region.
3.2 Select the language you want,
3.3 Put anything you want in the registration fields then OK.

step4. Interface Select
4.1 Click the [Setup] menu, then click the [VIM Select], then select the cable you’re using in the drop down list of “Interface Setup”, then Click [OK]

Fifth: What Techstream is good for? How to connect it with vehicle and how to diagnose Toyota

Techstream? What is it good for?

This software is used by the dealers to communicate directly with the on-board computers in all 1996-present Toyota, Scion, and Lexus models.

Start by connecting to the vehicle. Turn your ignition key ON and click the Connect to Vehicle button at the left. Various fields may be required at the first connection prompt. TMMK product (Toyota Motor Manufacturing Kentucky) can be found on the inside of the door jamb if this applies. VSC or w/o VSC, Smark Key or w/o Smart Key, and Laser cruiseor w/o Laser Cruise are some of the most common options asked for in this first menu. For newer models, the majority of these fields auto-populate, but for some older models, you may need to manually select all information for the vehicle you’re connecting to.

Once connected, you’ll see a window displaying all of the ECUs your vehicle has. Most didn’t realize their car had this many computers. All of these ECUs are expensive, so now you know exactly which parts some of those monthly car payments are paying for. The legend describes the status of each ECU. Yellow for all unknown ECU status, White means communication with ECU is normal, White with asterisk means the software either isn’t connecting properly to this particular ECU, or your car doesn’t have this ECU but it was included in the list like many generic ECUs are.

From the start, they will all show up yellow because you haven’t actually connected specifically to any of them yet. Running a health check (blue button near the left edge) will actually force the software to dig through each ECU one by one to check for stored information such as diagnostic trouble codes. You will probably wait a minute or two for this depending on how many ECUs your vehicle has. Having the vehicle running usually makes the health check more complete. The health check report will display a new window with the ECUs found and give you any Diagnostic Trouble Codes stored in each one. You can now click System Select near the top left tab to go back to the display of all ECUs and their status.

Each ECU controls a particular part of the car whether it be the engine, the anti theft, or the tire pressure monitor system TPMS. Double clicking any ECU or clicking once and clicking the green arrow at the lower right will take you to the list of DTCs for that ECU. Hopefully you’ll have none. Pending or Current codes are current problems. Pending means it has identified a problem, but the system may be set up to wait until it sees it again to confirm it is a problem that you should be made aware of by storing it as Current and turning the Check Engine Light or Message Indicator Light MIL on.

You can also enter most ECUs and check the Utility button to the left of the screen. You may find individual customization options within each that you wish to change. If you aren’t sure what it is, it’s best to leave it alone.

Techstream is capable of far far more than these simple things, but for first time use, those simple tasks will at least get you more familiar with the software and how to navigate it.

Troubleshoot 05 Lexus 470 yourself with MINI VCI

Dear Apple,

I have a 2005 Lexus 470 with 103,000 miles on it. There seems something wrong with my car. I have been putting my truck in low, keeping the tank dry and refilling with new fluid. Over the last 3 weeks, I have done that twice and my ride has improved 30-40% already. The car has never been towed to a repair shop, and has spent 99% of its life riding around this town with me in it only. How can I tell if my springs are no good? I do not want the dealer to check this for me since they will probably tell me that I need something expensive no matter what the report shows. So I am thinking about if there is a way that I can troubleshoot the problem myself? Thanks a lot.


Dear Luis,

You can check this yourself if you buy a MINI VCI for Toyota. The cable costs no more than €35 and can do simple diagnoses for many Toyota and Lexus cars.
This Toyota diagnostic scanner connects a laptop running Windows to your cars OBDII connector. Once you run TechSteam (Toyotas service software) you can read the pressures for the front and rear.


Best regards


MINI VCI FOR TOYOTA TIS Techstream V8.30.023

MINI VCI FOR TOYOTA TIS Techstream V8.30.023 supports Toyota TIS OEM diagnostic software, and supports all the diagnostic communication protocols needed for Toyota (since 1996).
MINI VCI is high performance with ARM cpu inside.
MINI VCI FOR TOYOTA TIS Techstream V8.30.023
Att. It can not update online
Update by email software latest verison:V8.30.023
If you need please contact us to get it.

Support Toyota TIS OEM diagnostic software
Cost-effective, the price of product is only one-third of similar foreign products.
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).
Not only provides commonly used J1962 connector, but also provides the old 22pin connector for Toyota.

MINI VCI V8.30.023 Supported Protocols:
K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4

Software display:
MINI VCI FOR TOYOTA TIS Techstream V8.30.023

If you are interested in our products, welcome to visit our official website:. ., as a professional auto diagnostic tools online supplier, places itself in a position of providing our main target market- European with a vast range of high-quality and affordable automobile maintenance tools.Our main business line covers: automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; obd2 Code Scanners, ECU Chip Tuning Tool, Car Key Makers as well as other more featured products.
If you have any questions, please do not hesitate to consult us:

Contact Information:
Live Support Live Support: Chat online now
Email Email:
Skype Skype: eobd11
Yahoo Yahoo: eobd11