The most technique Digiprog 3 Odometer Programmer

Digiprog 3 Odometer Programmer is produced with global standards. The latest Digiprog III has the most complete software. It is one of the best Mileage Correction tool on the aftermarket.

This state-of-the-art solutions are actually endlessly secured recent and even this high-quality principles are actually the best, pros on truck solutions, EDP machines regulate and even this statistic concept has got associated with experience in the field for online truck technological innovations and even always aim to stay in killing the competitiveness inside subject of experience.

It happens to be very easy odometer placer which in turn guidance multi-language. It’s a universal odometer programmer which covers more than 10 car makers. Digiprog 3 is required with the latest hardware and software. So it can quickly and easily adjust the speedometer and tachometer.

Digiprog 3 has the main technique for location which is on modern-day peripherals a good number different services tachometer and also speedometer mend button for your needs out in the open and doable method.

You can use the Digiprog 3 for all speed odometer, and engine control units, operating hours counter, keys, memory error, motorcycles, etc. easily programmed. Of course, you have to get the necessary cables and text manual.

How to deal with Mileage correction

We are talking used cars with a value of £2.5K+ where the mileage and records may be more important (It’s regular to use odometer correction tool to do Mileage correction), and in no particular order.

If you’re buying privately make sure that not dealing with an undercover small dealer, many such sales go hand in hand with clocking. Same goes for the V5 not being available or in a different name to the seller. There is no excuse for this.

Never buy without a documented and complete service history. This can be receipts, a stamped service book or a lease printout sheet. HJ likes receipts rather than/as well as a service book but I’m happy with just the book.

Open the service book and see they relate to the vehicle concerned. Look to see that the mileage patterns over the years fit in with the claimed usage. For examples fleets don’t buy diesel Vectras to do 7K a year, more like 45K+. Chat to the seller and note if he commutes 80 miles daily yet his yearly mileage is only 10K. Then something is up.

Most important is the “feel” of the vehicle. If you work on them you know what to expect at various mileages. Even the look of an under bonnet area can be a clue.

Private owners and fleets that might clock between services could be hard to spot. But they still have the odd item that strikes as odd, like the make and condition of types being wrong for the displayed mileage.

Owner craftily clocking car between services but realizes at a genuine 50K he is risking timing belt failure so asks for it to be done “early” by the dealer. Dealer puts it on the invoice or marks up the service book. You would have to think really hard why any owner would change the timing belt at an indicated 25K.

Also if you ever look at a car and find a little bit of card in the coin tray/change recess that is marked with the speeds in 3rd/4th/5th at certain revs wonder what that is for!

Sometimes “next service” stickers are left in after clocking giving a glaring clue as to the history.

There are a load more things but they are small items that you note in a fleeting moment that then build up a picture over 10mins or so walking round and chatting to the seller.

Overall it is about knowing what the likely mileage is of the car you are looking at and then asking very hard questions about any deviation.

What’s new in V4.94 Digiprog 3 mileage programmer?

Digiprog 3 mileage programmer (China clone) was updated to the newest 4.94 version last month. Once the 4.94 Digi 3 is released, Many mechanics and locksmiths, such as MHHAUTO forum members, are asking about what new things do this 4.94  possess or does it do anything different than 4.88?

When talking about software update, we usually mean updates about vehicle coverage, product performance and bug fix. So in most cases, there is no new function. The major improvements usually happen when the firmware of one tool is updated. The new Digiprog 3 is no exception. There is no new function in 4.94 Digi 3, but it has added support for the following new cars:

Audi:
-A3 new version

Ford:
-F150 24C16
-Falcon 24c02

Mercedes:
-W176 new version
-W204 new version Diag
-w212 new version Diag

Opel:
-Insignia new version
-Astra new version

How to update Digiprog 3 to 4.94?

Here you will need a Digi 3 update software package: http://www.eobd2.fr/digiprog-3-v485-update-service.html. The update software is available on EOBD2.FR for €40.00. The method to use the update software is easy. Please follow the guide in this link: http://www.obd-software.com/update-digiprog-3-4-88-latest-4-94/ .

Update Digiprog 3 4.88 to latest 4.94

The popular mileage programmer Digiprog 3 has been updated to the latest 4.94 version recently. Its V4.94 update software is also released in the same day on EOBD2.FR. Our technicians have made a quick tutorial on how to using the Digiprog 3 4.94 update software and how to upgrade the tool from 4.88 version to 4.94.

Step 1 – Open the V4.94 update software and find two zipped files inside. Copy and paste the files from to desktop and unzip both of them.
120150211192136
Step 2 – Open “Digiprog3 4.94 Update Video” on the desktop and unzip “COM 2.08.30 x86WHQL Certified” file.
220150211192248
Step 3 – Next we will install Digiprog 3 driver. Connect Digiprog 3 hardware to the computer and get a “Found New Hardware Wizard” window.

Step 4 – Select “Install from a list or specific location (Advanced)”.

320150211192333
Step 5 – Select “Include this location in the search”, click on “Browse” on the right, select “COM 2.08.30 x86WHQL Certified” and then click on “Ok”.
420150211192435
Step 6 – There will be a second “Found New Hardware Wizard” window. Click “OK” – “Next” – “Finish”.
520150211192525
Step 7 – Make sure the driver is installed successfully by confirming there is “USB Serial Port (COM4)” under “Computer Manager”.

620150211192616
Strep 8 – Open the other file on the desktop and then open “Digiloader1” inside it.
720150211192718
Step 9 – Select “COM4 – USB Serial”, “Digi1.bin” and click “Select the port and click me”.
820150211192807
Step 10 – Wait for a few minutes until you got the following prompt “Process end”. The V4.94 Digiprog software is installed successfully.
920150211192847
About Digiprog III V4.94

The latest Digiprog III is much similar with the V4.88 except the vehicle coverage. The 4.94 Digiprog 3 adds support for the following cars:

V4.94 Digiprog III Digiprog3 modèles ajoutés:

For Audi :
-A3 new version

For Ford:
-F150 24C16
-Falcon 24c02

For Mercedes:
-W176 new version
-W204 new version Diag
-w212 new version Diag

For Opel:
-Insignia new version
-Astra new version

For Audi:
A3 Diag new version
A6 Diag new version
A8 Diag new version

For Mercedes:
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version

For Ford:
Kuga Transit

For VW:
Amarok Polo Johnson

Here is a full list of Digiprog 3 V4.94 supported vehicle:
http://www.eobd2.fr/upload/pro/newest-v4.94-digiprog-iii-vehicle-list.pdf

€40 V4.94 Digiprog 3 update software

Digiprog 3 is a cost-effective mileage programmer popular worldwide. Its latest version is 4.94 that released recently. The V4.94 Digiprog 3 function is much the same as V4.88 but adds support for more car models on the basic of V4.88. Since Digiprog 3 is available for online upgrade, if you would like to update it, please check out the link below.
http://www.eobd2.fr/digiprog-3-v485-update-service.html

The Digiprog 3 V4.94 update software is available on EOBD2.FR for €40. By using the software, you will be able to upgrade your Digi3 to the latest version. The firmware of the tool remains the same.

V4.94 Digiprog 3 features:

1.    Supported Languages: French, Germany, English, Spanish, Portuguese, Italian, Turkish and Dutch.
2.    Good performance in digital speedo programming and correction.
3.    High quality that is second to none.

V4.94 Digiprog 3 newly added cars:

Audi:
-A3 new version

Ford:
-F150 24C16
-Falcon 24c02

Mercedes:
-W176 new version
-W204 new version Diag
-W212 new version Diag

Opel:
-Insignia new version
-Astra new version

For the full list of Digiprog 3 vehicle list, please visit: http://www.eobd2.fr/upload/pro/newest-v4.94-digiprog-iii-vehicle-list.pdf

Note on installing Digi3 V4.94 update software:

Please disable or uninstall anti-virus software during the installation in case your anti-virus software damage it or cause Digiprog 3 device blue screen. Please reset assured that our software is virus free and many customers have proved this.

Promotion:Buy YANHUA Digimaster III get free CAS4+ software

YANHUA, the manufacturer of Digimaster 3 odometer correction master, is offering a promotion on the tool. From today to 31st December, when you buy a Digimaster 3 mileage programmer from Eobd2 online supplier, you will get its CAS4 software for free, saving you €359.20.

eobd2-digimaster-3

Digimaster 3, also known as Digimaster III or D3, is a professional tool that supports almost all the vehicles in the world, BMW, Toyota, Honda, VW, Audi, Mercedes Benz, Opel, Renault, you name it. Apart from mileage programming, it also supports the following functions for some cars:

Audio decoding
Airbag resetting
ECU programming
Reading PIN

With CAS4+ software, Digimaster 3 will be able to program BMW keys including:

BMW Key programming on following vehicles:

BMW 1 series F20 (2011-)
BMW 5 series F10/F11/F18 (2010 upwards)
BMW 5 series GT F07 (2010 upwards)
BMW 6 series F12/F13 (2011 upwards)
BMW 7 series F0x (2008 upwards)
BMW X1 (2010 upwards)
BMW X3 F25 (2011 upwards)

So, what are you waiting for? Check out our official website, and pick up the Digimaster 3 and the free CAS4+ software before this great offer ends on December 31!

Top 7 Reasons to Get V4.94 Digiprog 3

Good news,V4.94 Digiprog 3 new arrival on Eobd2.fr.V4.94 digiprog 3 is latest version of Digiprog 3, add more car models on the basic of V4.88. Digiprog 3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle.
newest-digiprog-iii-entire-kit-1
Top 7 Reasons to Get  V4.94 Digiprog 3 :

1. Newest Version: V4.94
2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
3. Worldwide leader in digital speedo programming and correction software.
4. Quality standards are second to none.
5.Years of experience in digital vehicle engineering.
6. Professional technical service.
7. Has ST01/02 and ST04 Adapter in the Package Already, No Need to Buy Them Alone

 Some Important Tips for Using Digiprog 3:

1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.

Product link:http://www.eobd2.fr/v4.94-digiprog3-odometer-master-programmer-entire-kit.html

Digiprog III odometer programmer technical service

Digiprog III FAQ:

Q: Does Digiprog III change mileage for BMW after 2008year? Does Digiprog3 make key for BMW?

A: better use Digimaster 3 to program mileage for the high-end BMW. Digiprog3 can’t make key for BMW, advice you use AK300 key pro.

Q: Does digiprog3 work with VW golf 6 2009, golf 5 2006 and Peugeot 407 2006?

A: Yes. Digiprog 3 does. Please refer to digiprog3 vehicle list at: http://www.eobd2.fr/upload/service/digiprog-3-supported-vehicle-list.pdf

Q: When I connect Digiprog3 with computer, I got error “DiagProg3.Setup GetByte_USB-TimeOut”.
can't-connect-computer-2
A: Only when you want to update Digiprog3, you can connect Digiprog3 with computer. At other times, don’t connect Digiprog3 with computer.

Q: You say Digiprog3 can’t connect with the computer, then what is the “setup.exe” used for? Where is the USB cable to be connected? How to supply power? After plug the OBD cable into the car, Digiprog 3 suggests insert No.1 cable, do I have to remove dashboard?

A: 1) Do not install the CD-ROM software “setup.exe”.

2) When you want to update digiprog3, connect the USB cable to the computer.

3) It doesn’t need power cord if the digiprog3 is directly connected to the car, the car will supply power for digiprog3.

4) After you plug the OBD cable (16pin cable), digiprog3 suggests you insert NO.1 cable, it means you have to use ST01 cable, not OBD cable.

Q: I found Digiprog 3 power supply is not 220V, does it matter?

A: Generally speaking, Chinese power input 110-220V, digiprog 3 power input 110-220V and power output 12V.

Product link:http://www.eobd2.fr/original-yanhua-485v-digiprog-iii-digiprog3-odometer-master-programmer-new-version-release.html

V1.2 PSA BSI for Peugeot and Citroen Software Download

PSA BSI odometer correction tool includes PSA BSI software and hardware. PSA BSI software functions EOBD2 list below:

1. Read/Write KM stored in BSI
2. Read PIN code stored in BSI and use it to learn key
3. Read BSI Flash
4. Write BSI Flash produced by Johnson Controls
5. Read/Write BSI EEPROM produced by Siemens VDO

Please contact the hardware into PC before run PSA BSI software

Software version: V1.2
Language: English
Operating system: Windows XP
Update: Upgrade via email

logiciel PSA BSI

PSA BSI odometer correction tool support vehicle list, please check here .

Free download
PSA BSI tool v1.2 software and driver

The user manual in the package displays exactly how to read and write EEPROM, how to change odometer by PSA BSI KM tool.

How to solve V4.88 Digiprog III Digiprog 3 blue screen?

Recently a Digiprog 3 odometer correction tool eobd2 user came across blue screen problem. Following part is the analysis for Digiprog3 V4.88 blue screen problem.

Equipment:
Digiprog III/ Digiprog 3 odometer correction tool

Problem:
When turned on the ignition switch on the Digiprog 3 device, he found the blue screen program. (Shown as picture below)

1

Solution:
NOTE: The solution only concern with version V4.88 Digiprog 3.
2

Step 1 Take down the fly line between X1 and C30 in above red box.
Step 2 Pick off IC (integrated circuit) on the X1 and replace a new IC. The concave point on the IC should be directly aimed at the red dot in the above picture.
Step 3 Weld the fly line token down previously back to its original position.

Any questions feel free to contact with our technical support.