Active Sound Design (ASD) Retrofit Procedure using ISTA Rheingold

I thought I’d post of this thread to share my progress on retrofitting Active Sound Design to my 2013 328i MSport.

To start off with I ordered the module. It has various part numbers, but apparently they are all the same: 65129352264*; 65129326555; 65129343317; 65129353021; 65129362445; 65129362445; 65 12 9 322 712 (03/12 -> ); 65 12 9 302 536 (03/12 -> 07/13).*

I could not get a part number for the connector so I will be making up my own.

Next up I got the pin assignments from ISTA Rheingold:

PIN_zpsg8r3wgtb-01

Here is the inside of the connector:

inside of the connector-02

I then transposed all the pin assignments onto an image to make my life easier:

transposed all the pin assignments-03

I then continued to only connect power and the CAN signal.

connect power and can signal-04

ISTA detects the new module

ISTA before:

ista before-05

ISTA after:

ista after-06

E-SYS detects the new module:

e-sys-detects-the-new-module-07

After this I flashed the ASD module. I used a modified FA where I changed the production code typekey to 3C17 to ensure it is a production code that included ASD.

Here is the FDL edit view afterward:

fdl-edit-view-afterward-08

Next thing I must connect the feed from NBT head unit and output to the AMP. I first need to spend some time to make proper connectors so will update all you guys once I progress further.

Very excited to see this retrofit work!

How FSC code generator works on BMW F10 530xD (2013 year pre-facelift)

Have BMW F10 530xD (2013 year pre-facelift). Here are the steps I went through updating my map. I have professional navigation (NBT – next big thing). Originally the navigation had Road map Europe Next 2013. I downloaded Europe Next 2014-2, formatted 32 GB stick with FAT32 filesystem, copied the files and plugged into the usb port of the car. The car started transferring the contents to the internal hard drive and after one hour successfully updated the map. On the next restart of the car – it wanted the activation code. I wasn’t able to extract it with SWID tool so I used Ariataurus method with the following settings into E-Sys (downloaded E-sys
from http://rutracker.org/forum/viewtopic.php?t=4662346 ) – (there are installation instructions within the torrent):
– Diagnostic Address: 0x63
– Base Variant: HU_NBT
– Application number: 0xDE
– Upgrade Index: 0x1
I successfully extracted the FSC code and saved it to a file – FDZ17056_000DE001.fsc.
Then downloaded BMW_CIC_NBT_FSC_Generator
from https://mega.co.nz/#F!ugo0HB5L!TPCmejMKPBlRRkz2SDvg0Q. Extracted it and then went to NBT_fsc subdirectory. Then issued the command
fsc FDZ17056_000DE001.fsc 0xA9 0x05
last_seven_digits_of_you_vin_here
and got the correct activation code. The correct parameters for map Europe Next 2014-2 are 0xA9 and 0x05.
FSC code generator:http://www.eobd2.fr/fsc-code-calculator-software-for-bmw-navigation.html

BMW ICOM ISTA-D Software with Multi-language update to V2014.12

BMW ICOM software has now released the 2014.12 version with multi-language versions available on EOBD2.
Software version:
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
Software display:
bmwicom1image001
image003
And now, except English version, V2014.12 BMW ICOM software is compatible with multi-language versions, including Spanish, French, Italian, Portuguese, Swedish, Japanese, Greek, Thai and Dutch.
Here list the detailed info about these multi-language versions for V2014.12 BMW ICOM software as follows:
BMW ICOM 2014.12 Software Spanish version (SS130-12SP):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 French Software version (SS130-12FR):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Italian Software version (SS130-12IT):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Portuguese Software version (SS130-12PT):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Swedish Software version (SS130-12SW):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Japanese Software version (SS130-12JP):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Greek Software version (SS130-12GR):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Thai Software version (SS130-12 TH):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03
BMW ICOM 2014.12 Dutch Software version (SS130-12NL):
ISTA-D: 3.46.30
ISTA-P: 54.2.002
VIN: 2014.11.03

Product link:http://www.eobd2.fr/newest-201412-bmw-icom-ista-d-34630-ista-p-542002-software-hdd-multi-language-with-engineers-program.html

Free Download WinOLS software, manual and video

WinOLS is a software program that is written especially to modify the memory contents of ECUs. Eond2.fr here offers you free download WinOLS software download link:

WinOLS Demo Version Free Download
http://www.evc.de/ftp/winols/WinOLS_Testversion.EXE
WinOLS Demo Version Manual Free Download
http://www.evc.de/ftp/winols/WinOLS%20HelpEn.pdf
User manual for WinOLS and BDM100
http://www.evc.de/ftp/winols/BDM100-en.pdf

Some screen shot of WinOLS demo version:
1WINOLS PROJECT START
2WINOLS PROJECT CHOICE
3WINOLS PROJECT CREATE
4WINOLS PROJECT FORMAT
5WINOLS-PROJECT-IMPORT-PROPERTIES
WinOLS Crack/Original version:

If you need original crack version, please order WinOLS version 1.500 with unlock patch from Eobd2.fr webpage.

WinOLS 1.500 with unlock patch installation instructions:

1) Disable any anti-virus software or any firewall software
2) Run “winols 1.500.exe”
3) Unzip “CRACK.rar” and then copy the 4 files in it to WINOLS install folder
4) Run “loader REG.exe”, open “key.txt” and copy the username and license to the registration window
5) Run “loader OLS.exe”

Or you can check the WinOLS crack version video instruction here:
https://www.youtube.com/watch?v=xw70n8dVPlQ

You need a chip tuning interface and program tool to extract the engine ECU file from your own engine ECU. MPPS, K-TAG, FGTech Galletto, KESS V2 and BDM 100 etc ECU programmers are great choices for WinOLS software program.

Recommended you 3 most popular Nissan pincode calculators

Have you still felt confused on how to choose a satisfactory Nissan pin code calculator in the market? If so, what I list here may arouse your interest.
Here are 3 most popular Nissan pincode calculators for your reference:
1. Hand-held NSPC001 Nissan Automatic Pin Code Reader

nspc001-nissan-automatic-pin-code-reader-01
NSPC001 Nissan Automatic Pin Code Reader comes with 100 built-in tokens which support all Nissan cars that can read out BCM codes. NSPC001 can transfer 5-digit code to 4-digit code, the newest 20-digit code to 20-digit code. One 20 digit code will cost one token. 5 digit code to 4 digit code no need tokens. The most distinguished advantage of this pin code reader is that no computer is needed, no need install software, and just plug and play, automatic transfer.
2.Pin Code Calculator for Nissan for New BCM Modules

nissan-infiniti-pin-code-modules-1
Newly release mini size Nissan pincode calculator supports the latest version 6.0. This device is a dongle for running Nissan PIN Code Calculator software. It supports 20 Digit Code calculating for New 2013-2014 Nissan BCM Modules. As a token-used device, each time cost 5 tokens and 4 Digit Code unlimited times. In other words, users can calculate total 200 times.
3. VPC-100 Pin Code Calculator Hand-Held With 500 Tokens

vpc-100-hand-held-vehicle-pincode-calculator-new-1
VPC-100 Hand-Held Vehicle Pin Code Calculator support lifetime upgrade online. It comes with 500 tokens (300 free tokens online and 200 tokens in device). It can calculate almost all cars from American/European/Asian. The token consumption rate in the web mode is two times of that in VPC-100 machine. It is an easy-to-use and powerful pin code calculator for locksmith man. It also has the web mode, which is suitable to DIY users.

€40 Digiprog 3 V4.94 update software

Digiprog 3 has been updated to 4.94 version recently. If you have a Digiprog 3 of old version, you can now update it to the newest for only €40 with free shipment. By installing the Digiprog 3 V4.94 update software, you can easily improve your mileage programmer. The update software is now available on EOBD2.FR: http://www.eobd2.fr/digiprog-3-v485-update-service.html.
newest-digiprog-3-v494-update-software-1
The 4.94 Dg3 adds support for the following cars:

Audi
-A3 new version

Ford
-F150 24C16
-Falcon 24c02

Mercedes
-W176 new version
-W204 new version Diag
-w212 new version Diag

Opel
-Insignia new version
-Astra new version

How to install the update software:

EOBD2 technicians have made a tutorial on updating Dg 3 to 4.94. Please follow this video to install the update software: https://www.youtube.com/watch?v=fKZXxgRwPtE.

Note on installing the update software:

1) Laptop must be connected with power supply to ensure adequate supply
2) Computer cannot enter standby mode, the screen saver
3) Equipment connected power must be stable. Machines cannot power off during the upgrade process.

If you are interested in the Digiprog 3 4.94 and would like to know more about it or have any questions about it, please visit our official website at www.eobd2.fr or contact our customer service at E-mail:sales@eobd2.fr.

Hand-held NSPC001 Nissan Automatic Pin Code Reader only €120

nspc001

What I read from this picuture:
1.    Handheld with screen, so it needs no install on computer, plug and play.
2.    With both the Male and Female OBD connectors, it looks like the old inline Ford/Mazda incode calculator units; therefore it needs to connect to the vehicle to read out pin code.
3.    It has no buttons, this need to be used in conjunction with another tool.
4.    NSPC001 connects to your tester and to the vehicle

NSPC001 can do as follows:
NSPC001 can read out pin code from BCM module
NSPC001 can read newest 20-digit pin code

NSPC001 contain 100 tokens, it will deduct 1 token to calculate a newest 20-digit pin code, and it won’t deduct token to calculate a 4-digit code.

NSPC001 Nissan Automatic Pin Code Reader what works?
Can read pin code for some 2014 year Nissan, one of www.eobd2.fr customer proved it can work on a 2010 Nissan qasgcai, worked on 2013 Nissan qashcai , worked on 2008 Nissan navara, 2009 qashcai today in under a minute

Nissan Pin Code indentify and calculate method

PIN code for NATS (Nissan Anti Theft System) Immobilizer used in most of Nissan and Infinity vehicles. NATS (Nissan Vehicle Immobilizer System), also known as NVIS (Infiniti Vehicle Immobilizer System.).

How to identify Nissan Pin Code:

1) USA made models with NATS5, NATS5.6, NATS6 immobilizer – 5 digits code from BCM label (Body Control Module, p/n 284B1, 284B2) made in Japan by Calsonic Kansei Corp. for Siemens VDO.
2) Models with NATS5, NATS5.6, NATS6 immobilizer – 5 digits code read with an diagnostic equipment like AD100Pro, Carman Scan and others.
3) Any models with NATS6 immobilizer – 4/4 digits code from SEC label (Smart Entrance Control unit, p/n 28550) made in Europe by Siemens.
4) Any models with NATS5 or NATS5.6 immobilizer – 6/4 digits code from ICU label (Immobilizer Control Unit, p/n 28590) made in Mexico or Germany by Siemens.
5) Models with NATS7 immobilizer – such as Micra K12, Note and others – you need to read dump from BCM made by Johnson Controls or ECU and calculate code by dump.
6) 2003 Infiniti Q45, M45 and probably some other models with NATS5 – 5 chars crypted code from IMMU (Immobilizer Unit) label, p/n 28591.

To identify NATS version to calculate pin code for Nissan vehicles- check label on ICU: STEP-5 means NATS-5, STEP-5.6 means NATS-5.6, STEP-6 means NATS-6 and STEP-7 means NATS-7.

How to calculate Nissan Pin Code:

Many Nissan Pin Code calculators are available in Outil de diagnostic automatique Boutique en ligne | OBDII French. Following are the three most popular one.

1) Pin Code Calculator for Nissan for New BCM Modules
nissan-pin-code-calculator-300x300
Newly launched mini size Nissan pin code reader supports comes with the latest version 6.0. This product is a dongle for running Nissan PIN Code Calculator software. It supports 20 Digit Code calculating for New 2013-2014 Nissan BCM Modules. It is compatible with total 1000 Tokens, each time cost 5 tokens and 4 Digit Code unlimited times. Put another way, so users can calculate total 200 times.

2) NSPC001 Nissan Automatic Pin Code Reader
NSPC001-Nissan-Automatic-Pin-Code-Reader-300x300
NSPC001 Nissan Automatic Pin Code Reader comes with 100 built-in tokens which support all Nissan cars that can read out BCM codes. NSPC001 can transfer 5-digit code to 4-digit code, the newest 20-digit code to 20-digit code. One 20 digit code will cost one token. 5 digit code to 4 digit code no need tokens. The most distinguished advantage of the pin code reader is that no computer is needed, no need install software, just plug and play, automatic transfer.

3) VPC-100 Hand-Held Vehicle Pin Code Calculator
VPC-100-Hand-Held-Vehicle-Pin-Code-Calculator-300x300
VPC-100 Hand-Held Vehicle Pin Code Calculator support lifetime upgrade online. It comes with 500 tokens (300 free tokens online and 200 tokens in device). It can calculate almost all cars from American/European/Asian. The token consumption rate in the web mode is two times of that in VPC-100 machine. It is an easy-to-use and powerful pin code calculator for locksmith man. It also has the web mode, which is suitable to DIY users.

Newest BMW ICOM Software With HDD update to 2014.11

Newest version BMW ICOM ISTA-D 3.44.50 ISTAP 53.4.002 Software HDD with BMW Multilanguage update to 2014.11.It can support BMW all series diagnose and programming is now available in Eobd2 shop.

2014.11 Software version:
ISTA-D:3.45.40
ISTA-P:53.5.003
VIN: 2014.9.25

2014.11 BMW ICOM Software HDD language:
Chinese, English, German, Korean, Russian (More language will be added)
Latest software bmw icom
latest-software-bmw-icom-3
How to update ICOM firmware?

1. Connect BMW ICOM A2 device with computer via network cable while connect the ICOM A2 interface into the BMW OBD port to charge power supply.

2. Brose the IE Internet Exploer, launch : http://169.254.33.45:60080/, thean login with username/password: root/NZY1150263

3. Select and click “Update Firmware”, ICOM firmware version information will display on the program.

4. Open “ICOM-BootImage-01-13-00.bin” file and set image type to SYSTEM, click “Send the file”.

5. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.

6 Click “Update Firmware” button when “The SYSTEM IMAGE update was successful” notice pops out.

7. Select and open “ICOM-ApplicationImage-01-18-00.bin”, set image type to APPLICATION, click “Send the file”. The process will takes some time, please wait patiently.

8. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.
9 Click “Reboot” when the upgrade procedure is complete.

NOTE:
Set up your computer to obtain an IP address automatically. No network and also no connection with the original server when using the bmw icom software hdd, otherwise it will be damaged, and need you send back for repair.

BMW ICOM Rheingold ISTA-D 3.44.50 ISTA-P 53.5.003 Software Expert Mode Win7

BMW ICOM Rheingold ISTA-D 3.44.50 ISTA-P 53.5.003 Software advantages:
1.    BMW ISTA-D&ISTA-P 2 in 1 develop version. Newest database version can recognize BMW vehicle VIN number which produced in April, 2014.
Newest version:  ISTA-D:3.44.50 ,  ISTA-P: 53.5.003, VIN: 2014.8.11.
201409-bmw-icom-software-multi-languages-with-engineers-programming-3
201409-bmw-icom-software-multi-languages-with-engineers-programming-8
2.    Support both diagnosing and programming for all series BMW models.
3.    With bonus engineer programming software.
4.    Software stored in a 500GB Moveable hardware.
5.    Support multi-language in diagnose and programming, also TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.
201409-bmw-icom-software-multi-languages-with-engineers-programming-2
BMW ICOM Rheingold ISTA-D 3.44.50 ISTA-P 53.5.003 computer system requirement:
Only run with Win 7 32bit
Dual-core processor, better above I3; over 4G of memory
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.
201409-bmw-icom-software-multi-languages-with-engineers-programming-9
BMW ICOM Rheingold ISTA-D 3.44.50 ISTA-P 53.5.003 works with the following ICOM A2:
1.    2014 BMW ICOM A2+B+C Diagnostic & Programming Tool without Software (Item No. SP168-B)
2.    2014 BMW ICOM A2 + B + C Diagnostic & Programming Tool (Item No. SP168-BA)
BTW, I have two sentences to point out the difference of Item No. SP168-B and SP168-BA:
1)    Item No. SP168-B is general version, most users buy this version, it has the same hardware SN as ICOM A1.
2)    Item No. SP168-BA applies new hardware SN which differs from SP168-B/C and work very well. SP168-BA packed not with software.

More screenshot display BMW ICOM Rheingold ISTA-D 3.44.50 ISTA-P 53.5.003 details:

201409-bmw-icom-software-multi-languages-with-engineers-programming-5
201409-bmw-icom-software-multi-languages-with-engineers-programming-7

Product link:http://www.eobd2.fr/20149-bmw-icom-ista-d-34450-ista-p-535003-software-hdd-multi-language-with-engineers-programming.html