Top 10 ECU tuning tools for mechanics, car repair center

1.    Galletto 1260 ECU Chip Tuning Tool

Galletto 1260 is a cheap and efficient device with hardware and software for auto chip tuning.

Galletto 1260 features:
It works on EDC16, EDC15, MEx.x , DELCO and many more engine4s ECU.
It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.
It supports more cars than any other obd2, eobd tuning tools.

Language: English/ Spanish/ French/ German/ Italian/ Portuguese

2.    KWP2000 Plus ECU Remap Flasher

KWP2000 Plus is an improved version of KWP2000. It is a cost efficient tool that read and writes vehicle ECU software.

KWP2000 Plus functions and features:

It is easy to use
It reads and analyzes current ECU software
It upgrades the ECU software with a re-mapped file
It repairs ECUs with software problems or corruption.
It supports high speed ECU flashing
It leds indications for USB-power Car-power/rx/tx
It supports both KWP2000 plus software and other KWP/ ISO software.

3.    V54 FGTech Galletto 4 Master BDM-Tricore-OBD Function ECU Programmer

FGTech Galletto is a famous chip tuning tool for all cars, trucks, motorcycles and Marine. Its latest version is V54.

The V54 Fgtech Galletto features:

It not only works as FGTech Galletto 4-Master, but also work as BDM-OBD.
It supports Tricore Function
It supports all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore and checksum
It support languages: English/ Italian/ German/ French/ Spanish/ Portuguese/ Czech/ Turkish
It supports Windows XP, Vista and Win7
Unlock version, can use directly, no need activation
FGTECH V54 PCB board: Specially designed

4.    XPROG-M V5.0 XPROG-M Programmer X-PROG-M V5.0

The XPROG-m programmer is an improved version of XPROG programmer. It fully upward-compatible hardware with XPROG programmer and have many additional features. Its latest version is V5.0.

XPROG-M Programmer V5.0 functions and features

The XPROG-m can be connected by BDM.
It supports in-circuit and on-board programming of Motorola 68HC05, 68HC08, 68HC11, 68HC(S)12 family MCU’s, Texas Instruments TMS370/TMS374 family MCU’s and serial EEPROMs.

5.    Piasini Engineering V4.3 Master Version

Super Piasini Master V4.3 can read all dump of chip by bin file and you can write or edit dump yourself. It is updated version for V4.1, support more vehicles.

Piasini Engineering V4.3 Master functions and features

1. Latest Firmware version: V4.3
2. With USB dongle, software no need active, directly use.
3. It is Master version, support full dump file read and write, support more vehicle list than V4.1.
4. JTAG – BDM – K-line – L-line – RS232 – CAN-Bus
5. Read/Write Programmer
6. Windows XP System
7. Checksum Correction Incorporated for Mitsubishi/Denso/Hitachi
8. Server On-line Updates and Security Survey
9. New ECU Implementation Free of Charge

6.    V2.06 KESS V2 OBD Tuning Kit

V2.06 Kess V2 following on the success of the tremendously stable and versatile Kess 1, this latest addition to the Alientech stable is probably the most advanced tool available today.

V2.06 KESS V2 functions and features:

Software Version: V2.06
Do car ECU programming
Support Languages: English/German/ Spanish/ Italian/ Portuguese/ French
With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850
Work as a successful tuner with a very affordable price
No token limitation

7.    V2.06 KTAG K-TAG ECU Programming Tool Master Version

KTAG K-TAG ECU Programming Tool is designed entirely around the needs of our customers to be more responsive and reliable.

V2.06 KTAG ECU programmer functions and features:

Software Version: V2.06
Hardware Version: 5.001
Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
Support BDM Function Well

8.    2014 Nouveau MPPS V16 ECU Chip Tuning for EDC15 EDC16 EDC17 inkl CHECKSUM

This MPPS V16 is the newest professional ecu chip tuning tool, completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.

MPPS V.16 functions and features:

Recalculation of checksum
Read / write flash
Support VAG EDC17 CHECKSUM
Requires Windows XP sp2
Support multi-Language: Afrikaans/ Albanees/ Bahasa Melayu/ Cech/ Cymraeg/ Deutsch/ Esti/ English/ Espanol/ Filipino/ Finnish/ Francais/ Galego/ German/ Hrvatski/ Indonesia/ Italiano/ Kiswahili/ Latviesu/ Lietuviskai/ Magyar/ Malti/ Nederlands/ Norsk/ Polska/ Portuguese/ Romanian/ Slovencina/ Slovenski/ Srpski/ Suomea/ Svensk/ Turkish

9.    UPA USB V1.3 Programmer

New UPA USB Programmer with Full Adaptors is the main Device can be directly connected to the Elrasoft.

V1.3 functions and features:

Support MC9S12HY64/HA32
Support program EEproms
Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B,
S25FL004A/008A/016A/032A/064A   + Added 24C1024, 24C1025 support
Bulk erase data memory to PICs 16F913-7/946, 12F629/675
Script function GetPage
Script function AutoBaudRateDevice (hc08 devices only)
Script function GetProgrammerFrameChildCtrl ( AChildCtrlName: string): TControl
Script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM
Fixed bug with script functions ProgramDevice, ReadDevice
Fixed bug with 68hc11 reading if Oscillator is not set to Auto
Updated script example files
The software is digitally signed
USB driver upausb.sys is digitally signed and can be used with 64-bit windows XP/Vista/7

10.    V7.28 CARPROG Full

Carprog Full V7.28 (with all softwares activated and all 21 items Adapters) is designed with regard to demands of the customers to have universal tool for car radios, odometers, dashboards, immobilizers repair.

V7.28 CARPROG functions:

Program ECU
Program IMMO
Program Dashboard
Reset Airbag
Decode radio code
Program MPU
Support Windows XP

For more information about these tools and other ECU programmers, please visit EOBD2.FR official website: http://www.eobd2.fr/wholesale/programmateur-calculateur-auto/

Newest XPROG M V5.50 ECU Programmer available on EOBD2

XPROG M V5.50 ECU Programmer, the newest product of XPROG Box series is now available on EOBD2. To celebrate its debut, the device is sold at a price of €80.00. The latest XPROG M now supports CAS4 5M48H and more than 450 units (serial EEPROM`s, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).

new-x-prog-box-ecu-programmer-xprog-m-v5-5-4
XPROG-M V5.50 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx(New added)
AUTH-0023-2 XC23xx(New added)
AUTH-0024-1 MC9S12Cxx(New added)
AUTH-0024-2 MC9S12XE(New added)
AUTH-0024-3 9S12XE SECURITY(New added)
AUTH-0024-4 MC9S12HA/HY/P(New added)

Adapters:
Product Code Description:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash

Learn more about XPROG M V5.50 product,please check:http://www.eobd2.fr/2014-latest-version-x-prog-box-ecu-programmer-xprog-m-v550-17937.html

FGTech Galletto 4 VS KESS V2 VS KTAG

Some users are confused what’s better among FGTECH Galletto 4, Kess V2 and Ktag? In order to help sort them out, EOBD2 engineer make a comparison table from the following aspects. Wish it can help you.

Comparison List FGTech Galletto 4 KESS V2 KTAG
Picture  fgtech-galletto-4-master-120 kess-v2-obd2-manager-tuning-kit-new-120 ktag-k-tag-ecu-programming-tool-120
Function read and write the Data of Engine ECU read and write the Data of Engine ECU read and write the Data of Engine ECU
Supported Vehicles World-wide famous brand cars, trucks and motorcycles World-wide famous brand cars World-wide famous brand cars, trucks
Truck Yes NO Yes
Motorcycle Yes Yes, work with a small part work with a small part
EDC17                work with a small part           work with a small part work with a small part
Via BDM or OBD Both via BDM and OBD Via OBD Via BDM
Update NO NO NO
Tokens NO 60 Tokens available, after use it up, get J-Link to add tokens. 500 Tokens available, after use it up, get J-Link to add tokens.
Language English, Italian, German, French, Spanish, Portuguese, Czech, Turkish English, German, Spanish, Italian, Portuguese, French Italian, German, English, French, Portuguese, Spanish
Additional remark:1) Most customers use FGTech Galletto 4 and KESS V2.2)KESS V2 has Anti-mediation lock module, it can do new and encrypted cars better than Fgtech V53.

3 Best Sold ECU Chip Tuning Tools For Share

Are you still looking for a best auto ECU programming tool? What are the hot vehicle ECU Chip Tuning Tool? And which one will be suitable for your car? FG Tech Galletto 4? KESS V2? Or anything else? Here, I would like to introduce you 3 best sold  ECU chip tuning tools.

fetech
1. FGTech Galletto 4 V54
Price: €78.00

FG Tech Galletto 4, a famous chip tuning tool, support for all car (such as Trucks, Motorcycles, Marine, BMD MPCxx and Checksum), is the fastest and most secure product on the market for its system developed with high-speed USB2 technology. FG Tech Galletto 4 supports window XP, Vista, Win 7 operating systems. Additionally, English, Italian, German, French, Spanish, Portuguese, Czech and Turkish are all available.

2. KESS V2 Master
Price: €133.00

KESS V2 Master can support the newest version 2.06, which is a professional ECU chip tuning tool for DIY users owing to its easy operation. The outstanding advantage is that it can do some newer car models when compared with K-TAG. KESS V2 is everything you need to work as a successful tuner at a rather reasonable price. This tuning tool is available on Italian, Dutch, English, Portuguese, French and Spanish.

3. XPROG-M V5.0
Price: €45.00

XPROG-M V5.0 is the new version of XPROG-M, which supplied by careucar.com with unlimited technical service, high quality, wholesale price and one-year warranty. It supports in-circuit and on-board programming of Motorola 68HC05, 68HC08, 68HC11, 68HC(S)12 family MCU’s, Texas Instruments TMS370/TMS374 family MCU’s and serial EEPROM’s.

On eobd2.fr, you can also find a series of new ECU chip tuning tools or programmers, I think you can find your own favorite one.

Article resource:http://www.eobd2.fr/service/3-meilleur-vendus-outils-ecu-chip-tuning-pour-partager-12671.html

What causes FGTech Galletto installation error?

This morning I received an email from my client Alfred. In the email, he told me that he ran across a problem when installing his FGTech Galletto 2 master. The ECU programmer prompts “ESEGUIRE RENEWAL CON FGTech_DOWNLOAD_UPDATE PER RIATTIVARE IL TOOL…”

FGTech Galletto 2 master

Since this is his first time using FGTech Galletto 2 Master tool, we can exclude the possibility of old FGTech software in his computer. Apart from this, there are three other possible reasons that cause this installation error:

1.The user does not follow our installation video and reset computer system time to between January 1st, 2013 and February 21st, 2013. To watch the EOBD2 FGTech Galletto installation video, please click here.
2.The user does not close the anti-virus software before installing FGTech Galletto software. Nor does he repair the FGTech software after it is damaged.
3.The FGTech software is not compatible with the users computer system.

Alfred is not the only one that has got this error message. The problem often happens to careless users. We suggest mechanics and drivers read the following 5 tips before installing the tool:

1. The computer system time should be from January 1st, 2013 and February 21st, 2013.
2. The computer should at least equip 2000Hz Intel processors Core and 2GB RAM.
3. There should be no other FGTech software on the computer.
4. The anti-virus software should be closed beforehand.
5. Ensure the hard drive of the PC is NTFS format.

Article resource:http://www.uobd.org/2014/07/what-causes-fgtech-galletto-installation-error/

Mpps v13.02 increases more power for ECU

The motor handle unit is for short Eu, is the personal computer that operates the engine inside a auto or truck. Yeah, the European likes the home laptop or computer, it takes advantage of and controls accessories like the ignition timing, fuel/air ratio, emissions controls and air-con in just precisely the same way as our property computers use the printer, keep track of or keyboard.

What’s a lot more, by modifying the software package that runs around the Ecu, we can raise the electric power and torque figures of our automobile. There use a affordable ECU chip tunning tool named MPPS V13.02. The machine with multi-language and most current variation V13.02 that allows read through and create memory within the automobile personal computer via the diagnostic connector. Supports the latest motorists EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi substantially additional.

The mpps v13.02 chip tuning for ecu can help quite a few kinds of vehicles, such as Alfa Romeo, Audi, BMW, Chrysler, Citroen and so forth, the thorough mpps v13.02 car checklist at http://www.eobd2.fr/mpps-v1302-chip-tuning.html.

Related article:http://www.uobd.org/2014/07/only-e11-mpps-v13-02-chip-tuning-tool/

Kess V2 “Connection not established” problem and solution

A customer contacted me yesterday and told me he had a problem using the KESS V2 software from us. After he installed the software, and tried to use it on his vehicle, he got an error message said “Connection not established”. At the same time, the red light on his KESS V2 ECU programmer came on.

)@C}{C{XYD{L@MP}B3WTF6E

Well, the problem is mainly caused because one of the original software file is destroyed. You can follow the below instruction to solve the problem:

1.Uninstall the KESS V2 software and then reinstall it.
2.Find “Ksuita” file in your local disk C, and copy and paste it to desktop.
3.Download the installation software to your laptop, and run the software. The software will then generate another “Ksuita” folder on Disk C, which we call new Ksuita folder.
4.When the installation software is successfully installed, open the old Ksuita file on your desktop, and copy and paste all files to this Ksuita file.
5.Go to local disk C, find the new Ksuita folder, and paste all the files of old Ksuita folder to this new one.
6.Run your KESS V2 software and test how it works.

Price off KESS V2 Tuning Kit on EOBD2

EOBD2 is offering a 5 big discount on popular KESS V2 OBD2 Manager ECU Tuning Kit. This is a master version for both amateurs and professions. The tool is now available for €145.00 only.

Kess V2 is an improved version of KESS, and features a new Alientech stable, which is probably the most advanced tool available today. It is able to program ecu chip tunning tool for almost all the major car brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850.

1. Software Version: V1.89

2. Add emulator in package.

3. Supported Languages: English, German, Spanish, Italian, Portuguese, French

If you are interested in obd2 tools, please visit EOBD2 official website at www.eobd2.fr.

NEXIQ receives ERROR CODE 275

Hi, there.

I have a problem with my NEXIQ 125032 USB Link. After I connected it to a Toyota and starting the car ECU, my NEXIQ prompted an error message, reading “Received Error Code: 275 ERR_OPENING_PORI”. Below is a picture of the message. What could be the problem? This is my first time using the tool. Could it be that the tool is broken. Thanks.

Pane

NEXIQ USB Link + Software Diesel Truck Diagnose Interface and Software with All Installers

Dear Pane,

The error message means that the software of your NEXIQ 125032 cannot recognize the hardware. It is properly the driver of your NEXIQ is not installed successfully, and therefore the software could not recognize it.

Please reinstall the driver and try to do ECU chip tuning once again.

Best regards

Janet

Get Mpps V16 for Four Reasons

Newest MPPS V16 is professional ecu chip tuning tool, it is completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.
Langues:Francais,Italian,English,Portuguese,Spanish,German,Greek,Polish.

newest-mpps-v16-ecu-chip-tuning-for-edc15-edc16-edc17-inkl-checksum-1

Mpps V16 Features:
1. Recalculation of checksum
2. Read / write flash
3. Requires Windows XP sp2

Get Mpps V16 for Four Reasons:
1. The MPPS V16 modern interface that allows you to read and write memory from the on-board computer through the diagnostic connector.
2. Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more …
3. Professional services, without unnecessary boxes and wires.
4. All the electronics to OBD2 connector.

MPPS V16 ECU Chip Tuning Video:
How to install MPPS V16 Software