Setup X-horse BMW Multi Tool CAS Plug to program EWS key

X-horse BMW Multi Tool is the first universal key programmer that can program both BMW CAS (CAS1, CAS2, CAS3, CAS3+ and CAAS4) and EWS key.

BMW Multi Tool key programmer alone cannot program EWS key, you need to connect it with a CAS PLUG. The CAS PLUG for BMW Multi Tool adds EWS function and some CAS possibilities.

CAS PLUG adapter:

bmw-multi-tool-1

1.Connect to device OBDII

2.Supply 12V voltage

3.EWS OBD line

4.EWS OBD line 2

5.7 Series CAS1/CAS2 plug

6.CAS3/CAS3+ plug

How to Connect EWS with CAS Plug:

bmw-multi-tool-2bmw-multi-tool-3

How to Connect 7 Series CAS1/CAS2 with CAS Plugbmw-multi-tool-4How to connect CAS 3/CAS3+ with CAS Plug:

bmw-multi-tool-5

 

BMW Multi Tool: program EWS and CAS Key from EEPROM Dump

Before programming a BMW Key, you need to have a basic understanding of your BMW immobilizer system. BMW immo system can be generally divided into two categories: EWS and CAS.

BMW

EWS immo:EWS1、EWS2、EWS3、EWS4

CAS immo:CAS1、CAS2、CAS3、CAS3+、CAS4

How to tell your BMW is EWS or CAS immo?

  1. Year

1) 2000-2003/04 BMW 3-series, 5-series, 7-series with straight shank remote control key belongs to EWS system, like picture below.

BMW-key-immobilizer-1

Here is the EWS immobilizer ECU

BMW-key-immobilizer-2

2) 2004-2006 BMW 3-series, 5-series, Z4, X5, X3 belongs to CAS2 system. CAS2 and CAS3 immo ECU picture display as below. Another Straight shank remote control key (similar to Land rover key) with BMW logo, but in black color, belongs to CAS2 immo system as well.

BMW-key-immobilizer-3

3)

CAS1: old BMW 7-series

CAS2: 2004-2006 BMW 3-series, 5-series, Z4, X5, X3

CAS3: BMW 3-series, 5-series before year 2010

CAS3+ BMW 3-series after year 2010

CAS4: BMW 5-series after 2010, BMW 1-series after 2011

BMW-key-immobilizer-4

  1. Car key type

CAS1 BMW 7-series should insert the smart card into the slot and press start key.

CAS2 is the straight shank remote control key

If BMW key needs insert smart card into the slot and press one key to start vehicle, all these keys are easier before CAS+., almost of them are CAS3.

CAS4 key no need to insert the smart card to slot, directly press Start button

For example, if your car id BMW X5 2009, it should be CAS3 system.

After confirm your immo type, the next is to pick up a proper key programmer. AK90 key programmer (for all EWS), AK300 key programmer, Car key master, BMW Multi Tool are all good options for BMW key programming. BMW Multi Tool is the most stable and recommended.

BMW Multi Tool key programmer is mainly designed to work on CA1, CAS2, CAS3, CAS+ CAS4. But it newly added EWS key programming if provided with CAS PLUG EWS adapter.

BMW-key-immobilizer-5

CAS1 write key

CAS2: requires demolition, write key after read data

CAS3 and CAS3+: no need demolition

BMW Multi Tool has two key programming options: File Make Key and Make Key online via OBD2.

1) File Make Key:

Select “File Make Key” tab,

Insert new CAS2 key into the CAS Adapter

Do not need to connect BMW Multi Tool with vehicle, only connects it with computer,

Select CAS2

Click Key learning

CAS2 key has been programmed
multi-obd2-tool-key-programmer-for-bmw-connection

2) Make Key online via OBD2

Connect BMW Multi Tool with vehicle, then connect with computer,

Select Auto Detect, the system will automatically detect the protocol and type

Click Write EEPROM, then click Save to File…

Click Key Learning.

Then the system will display following message:

Make dealer key- using CAS Adapter (make key using CAS adapter)

Make dealer key-using ignition switch (Turn ignition ON/OFF)

The first way is frequently used.

Click Get Key Info, then the system will display key information. Select any key position number (KeyID3, 4,5)

Insert the new smart card into the CAS Adapter, click “Make Dealer Key-using CAS Adapter”

After that the system will display, select Add key, press Next

Make dealer key successfully.

Plug the original key form key slot, insert the new key into the key slot, the new key is ready to use, the remote can be activated as well.

Click “Synch DME-CAS”

bmw-multi-tool-5

SP08-C Lexia 3 PP2000 Diagbox fails to communicate issue

Lexia 3 XS Evolution Peugeot Planet PP2000 Diagbox item no SP08-C is the best quality lexia PSA diagnostic tool with original 921815C chip that works excellent on Peugeot 307. But recently one of SP08-C customers reported that his lexia interface cannot communicate with vehicle.

Eobd2.fr engineers have worked out the solution. The solution fits all following 3 situations.

Occasion 1: Connect lexia3 cable with computer but there is no communication with the computer

Occasion 2: Change many vehicles but still cannot read ECU after plugged the lexia cable

Occasion 3: The device can be detected for 1 or 2 times at the beginning, but cannot be detected later.

Solution:

You have to change the lexia 3 PCB chip marked red below

lexia3-pp2000-diagbox-pcb-chip

Please contact eobd2.fr customer service and order the SP08-C lexia 3 chip to replace the old one.

Carprog full V7.28 cables and functions list

CarProg V7.28 ECU tuning, airbag resetting, odometer correction, radio programming, EEPROM programming tool comes with full set cables and connectors. Here is the full set carprog cables list and corresponding functions.

carprog-7.28-1carprog-7.28-2carprog-7.28-3carprog-7.28-4carprog-7.28-5carprog-7.28-6

  1. CarProg Main hardware interface
  2. A1 – OBD2 Adapter Cable (Inside have K-line and CAN bus switches. Use with all car complained with OBDII standard)
  3. D1 – Odometer-airbag Adapter (Dashboard, Airbag programming adapter)
  4. A3 – Transponder Antenna (Used with all CarProg immobiliser software)
  5. A10 – Motorola Adapter Cable (Motorola MCU programming adapter)
  6. A11 – BMW EWS Adapter Cable (Used with BMW Immo software)
  7. A16 – Car radio Cable (Used for Opel, Renault, Peugeot, Citroen car radio made by Philips decoding)
  8. A15 – Cable (Used with D1 adapter, Universal car dashboard and airbag programming adapter)
  9. A17 – Honda Airbag OBD2 Cable (Adapter for Honda airbag reset by OBDII)
  10. A4 – Eeprom Adapter Cable (Used for eeprom programming)
  11. A5 – DIP8 Clip Cable (DIP8 Clip for eeprom programming)
  12. A6 – SOIC8 Clip Cable (SOIC8 Clip for eeprom programming)
  13. A7 – MB 38-Pin Cable (Used with MB Airbag and dashboard software)
  14. A8 – BMW 20-Pin Cable (Used with BMW airbag and dashboard software)
  15. RNS510 Adapter Cable (RNS510 radio decoding interface cable)
  16. VOLVO FORD CAN 2006+ Cable (Needed for airbag and dashboard programming)
  17. FIAT CAN 2006 Cable (Needed for airbag and dashboard programming)
  18. C1 OBD2 Female Cable
  19. USB Cable
  20. Power cable
  21. CD (Latest Release Software v7.28 and User Manual)

YanHua DigiMaster 3 D3 Device not found error

One of the customer reported that he got two errors when using YanHua DigiMaster 3 odometer correction tool.

Problem:

When changing odometer for Audi with D3 mileage tool, he got the “DEVICE NOT FOUND” error message, he carried on operation but to meet another error: “Obtain BIOS information fails, please re-power” (shown as picture below)

Possible reason:

Improper operation or improper shutdown the Digimaster III device which leads to the corrupt of the CPU files

Solution:

Need to re-flash CPU for Digimaster 3.

Browse to DigiMaster 3 official website:

http://www.autoemaster.com/

Download D3 Reflash SDCard rar, there is CPU re-flash instruction in the file

Reset BMW ECU to factory setting with NCS Expert software

If bimmers want to update your BMW ECU, retrofit CIC, or you have done a wrong coding/wrong setting, the best way is to bring it back to factory default settings. Here is an ECU resetting to factory settings guide with BMW ICOM engineering NCS-expert coding software.

Tool needed:

BMW ICOM ISTA-D ISTA-P with engineering software NCS Expert
BMW ICOM A2+B+C diagnostic system
A laptop running Win 7 O/S

Instruction:

1) Loading profile

Well loaded and installed BMW NCS expert software
Set up and connect BMW ICOM a2+b+c diagnostic hardware with vehicle via OBD port
Open NCS expert software
Select Expert mode
Choose Expert Mode Profile
(If you do not have Expert Mode Profile, loading the file you usually using)
Click File>>Edit Profile>>FSW/PSW

Click File-Edit Profile-FSW PSW

Uncheck the option in the red box
Click OK
Click Profile Info>>name the profile as you want
Click OK to close the Profile Editor
Click File>>Save profile as the name your precious named
Now you have a profile for loading factory settings to any ECU in the car

2) Reset ECU to factory default setting

Press F1 button
Select F3 and choose your car chassis from the list
Click OK
Press F6
Press F4
Choose the ECU your would like to code with factory default options of your car
Press OK

Choose the ECU your would like to code with factory default options of your car-2

Press F2
Choose “SG-CODIEREN”

Press F2-3

Press OK
Press F3 “Execute Job” to start coding the ECU with factory setting according to your BMW vehicle order (VO)
ECU resetting is done. Exit the NCS expert software and disconnect the BMW ICOM hardware.

Eobd2.fr Galletto 1260 ECU Chip Tuning Free Download

Eobd2.fr Professional OBD2 diagnostic dealer provide full information for Galletto 1260 ECU Chip tuning free download.
galletto-1260-ecu
Galletto 1260 CD software Download
http://www.chinaautodiag.com/html/galletto-1260-ecu-chip-tuning-interface-files-download-248.html
Galletto 1260 FLASHER User Manual& Files download
http://www.eobd2.fr/upload/pro/galletto-1260.rar
Crack download
http://depositfiles.com/files/n1rqiqd14
DVD with the tuning files for the Galletto 1260 EOBDII Flasher
http://www.chinaautodiag.com/search/?q=SE01
Galletto 1260 vehicle ECU chip list
http://www.eobd2.fr/galletto-1260-flasher-217.html
Galletto 1260 DIY remap
http://www.civinfo.com/wiki/index.php?title=DIY_Remap_with_Galletto_1260

Frequently Asked Question:
Q: The CD is broken, I can not install, can you send me a new one or give me a link to download?
A: You can download software here: You can check our web and find download link.
Q: What’s the function of ECU safe 2.0 ECU program?
A: ECU safe 2.0 is a program that protects program in ECU against being read with all OBD flashers or programmers. You can write new program with any tool you want.
Q: Does this Galletto 1260 support Spanish?
A: Yes, English, Spanish, French, German, Italian, Portuguese are language available.
Q: Is it work on win xp or win 7 OS?
A: Galletto 1260 should be worked on Windows XP system.

Free Download VAG Tacho V5.0 USB version software

VAG Tacho USB Version V 5.0 is a multi-function VAG Kombi instrument / Immo box, eeprom programmer and odometer correction tool. The VAG TACHO 5.0 version supports VDO with 24C32 or 24C64. Here is the free software download link:
http://down.eobd2.fr/vagtacho-usb-version-v-5.0.zip

Operating system: Windows 7, Vista, Win XP, Win 98

Vagtacho usb version 5.0 features:

Lastest version 5.0, support VDO with 24C32 or 24C64,our vagtacho usb version 5.0 includes the functions of vagtacho usb 4.52 , vagtacho usb 4.0, and vagtacho usb 3.5
VAG Kombiinstrument / Immo box eeprom programmer!

Support for some VDO dashes for VW from year 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom memory. Important: These dashes requires ignition to be switched on with valid key of the car! Software version 5.0 works ONLY with interfaces which has got built-in programmer for Megamos ID48 transponders!
Built-in programmer for Megamos ID48 transponders! Pre-programming of TP2x transponders as dealer’s keys with component security data which is read from immobiliser!
NEW key programming feature for VAG cars with VDO dashes on CAN bus! (TP2 and UDS protocols)
Note: TP22,23,24,25 transponders are required!

vagtacho-usb-se77-5

List of supported VAG cars:

Volkswagen
Golf 6, Jetta, Polo, EOS with VDO dash 2009 – 2011, note: not all dashes are supported!
Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 – June.2006
Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003
Beetle with Marelli dash: 1998 – 2005
Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004
Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only)
Sharan with VDO dash: 2000-2004(mileage change only)
Caddy, Lupo with VDO or Motometer dash 1997 – 2002(mileage change only)
Transporter with VDO dash 1998 – 2000
LT35 ( Temic immo box) 1999-2003 (pin code read only)
Gol ( Kostal immo box) 1999-2003 (pin code read only)

Seat
Altea, Leon, Toledo with VDO 2003 – 6/2006
Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003
Alhambra with VDO 2000 – 2004(mileage change only)
Inca with VDO or Motometer 1997 -2000(mileage change only)

Skoda
Octavia II with VDO dash 2005 – 6/2006
Octavia, Fabia with VDO dash 1997 – 2004

Audi
A3 VDO dash 2003 – 2005
A3,A4,A6 VDO dash 1997 – 2000
A3,TT,A6 Magnetti Marelli dash 1998 – 2003
A4 Bosch dash 2000 – 2008 – Read/write of encrypted data with V4.5!
A4,A6,A8 1995-1999 (immo box – read pin code)