VAS5054 ODIS V19 CD and install video

Official news from www.eobd2.fr, engineer copy all the software of VAS5054A ODIS V19 into one single CD, which will be much easier to deal with only one CD rather than several CDs.

The files for cheapest VAS5054a ODIS V19 Bluetooth with OKI chip (SP33-D) as follows, which contained in one CD.
Audi CD 19.48 ENG (2.2013).iso
Bentley CD 19.09 ENG (2.2013).iso
Seat CD 19.78 ENG (3.2013).iso
SKoda CD 19.56 ENG (2.2013).ISO
VAS-PC_BASIS_19_01_01_GB.iso
VW CD 19.20 ENG (1.2013).iso
Lamborghini CD 19.12 ENG (9.2011).iso
5054-odis-v19-cd
The following files contained in one CD, which is for VAS 5054 ODIS V19 (SP33, SP33-B, SP33-C, SP33-BO)
Audi CD 19.48 ENG (2.2013).iso
Bentley CD 19.09 ENG (2.2013).iso Seat CD 19.78 ENG (3.2013).iso
SKoda CD 19.56 ENG (2.2013).ISO
VAS-PC_BASIS_19_01_01_GB.iso
VW CD 19.20 ENG (1.2013).iso
Lamborghini CD 19.12 ENG (9.2011).iso
odis v19 best quality
Note:
1.    VAS5054A V19 CD will be packed with every package, including Bentley and Lamborghini software.
2.    The software of Bentley and Lamborghini is only available with English. While ODIS V2.0 is multilingual.
3.    Eobd2.fr engineer made VAS5054A installation video tutorial contained in the CD named Install Video, please step-by-step follow the video to operate if you have any problem with installation.

How to activate Peugeot cruise control with Lexia 3 PP2000 diagnostic tool

Tool needs:

Lexia 3 V48 Peugeot Planet PP2000 V25 diagnostic tool

Vehicle model example:

Peugeot 406 HDi 90 2001

Please check that your vehicle can be retrofitted with cruise control before purchasing any parts or paying to activate cruise control in your ECU. Cruise control will not function unless the foot pedal, control stalk and master on/off switches are all present, adjusted correctly and working normally.

Instructions:

1. Install and activate lexia 3 PP2000 software. Select vehicle model. Select the application as PEUGEOT PLANET 2000.

2

2. The system will identify and configure vehicle information. Then select “ECU configuration and services”

3

3. Select “Test by ECU”

4

4. Select “Engine/automatic gearbox”

5

5. Select “Petrol” or “Diesel” according to your vehicle. Here select “Diesel”

6

6. Select the correct ECU for your vehicle. Variant can usually be identified from VIN code on left.

7

7. Switch on the ignition. Connect the portable to the test connector C001. Then the system is identifying and reading of the ECU in progress.

Select “Configuration” option in Carry out the tests menu

8

8. Select “Cruise Control” among various ECU modules and change this option to “present (activated)”

9

9.  Click “OK” to validate.

10

10. Click “Configure” button to save settings. Wait patiently for a few seconds don’t click anything else.

11

11. Click “Yes” for saloon and “No” for estate car

Click OK to validate

Open “Configuration” again to check that the changes have been recorded

Exit the program if settings have been saved