Free download V2014.02 Autocom/Delphi CDP Pro (Plus)

One of the Land rover forum moderators put in this way: “Autocom CDP Pro is one of the cost-effective and powerful tools for majority vehicle models in Asia market.” Autocom/Delphi CDP Pro has become the popular choice for most of technicians and vehicle owners.

CDP Pro/Pro+ has newly upgraded to newest V2014.02. You’ve got three ways to update your Autocom/Delphi CDP Pro (Plus):

?Download Free CDP Pro V2014.02 software

Eobd2.fr here offer you free download link here to download the newest V2014.02 software.
http://www.chinaautodiag.com/html/delphi-20142-sn-100251-software-free-download-16500.html
Then install the newest software and activate it to use.

NOTE: The method only fits for Bluetooth or none-Bluetooth Autocom/Delphi CDP Pro (+) with Serial Number 100521.

?Buy CDP Pro+ V2014.02 software

For who have got the previous old version Autocom/Delphi CDP Pro/ Pro+, you can buy the Tcs CDP Pro plus V2014.02 software in eobd2.fr. The Tcs CDP Pro plus V2014.02 software supports autocom CDP pro/pro+ and Delphi CDP Pro/Pro+ with all serial number. Then install and activate the software to run an upgrade.

? Download CDP Pro+ V2014.02 Update File

1) You can directly download the update file here:
https://www.dropbox.com/s/pj2keu3m2vlgdmt/Autocom%202014%20R2.rar?dl=0

2) Install the older version Autocom/Delphi CDP Pro Plus in your computer.

3) Replace all the files in Autocom/Delphi CDP Pro folder with update file

4) Open Autocom/Delphi CDP Pro update file and it will generate database

5) Connect the CDP Pro unit to the computer via USB port, click install hardware and firmware development, and you end up testing your sensor to see if the com is ok.

Notice:  The start menu is still 2013.3 version, after run the software; the real version V2014.02 then will be displayed on the system screen.

Steps to FVDI and AVDI read write data from MED17 EDC17

1. Connections

Tools you need:

PC, FVDI, USB cable, MEDC17 adapter, dongle, welding iron, solders, several 1K ohm resisters and 12V DC power supply.

(Note: refer to “medc17-pinout.pdf” that shows connections between MEDC17 adapter and MEDC17 ECU.)

Picture 1 shows connections between FVDI, PC, dongle, MEDC17 adapter.

Your PC has to connect to the network.
edc17-connection-01
2. Step-by-step to operate

Step 1: Disassemble MEDC17 ECU, and then uncover it.

Step 2: Connect MEDC17 ECU under instructions.

Step 3: Connect FVDI with PC, open VAG V21, and select special functions, and select “EDC17/MED17 Engine Control Unit”. It’s shown as picture 2.
edc17-med17-flash-02
Step 4: Select correct MCU type, and click “CONNECT” as Picture 3.
connect-to-medc17-03

Step 5: Read what you want to read.

Step 6: Assemble MEDC17 ECU and install it to vehicle

3.Notes:

1)    Only AVDI and FVDI can read out the data of MED17, EDC17 engine control unit, and calculate 6-digit Security Byte.

2)    New VW Magotan, Passat, CC engine type is MED17.5.XX,it is impossible to read out these models’ 7-digit Security Byte by only reading out data from comfort module, then it’s impossible to make new keys when all key lost and module programming.

3)    VAG 18.0 or newer version of FVDI can get 6-digit Security Byte and 5-digit login password by reading the data from MEDC17, and get 7-digit Security Byte by reading data from comfort modules.