Newest BMW ICOM Software With HDD update to 2014.11

Newest version BMW ICOM ISTA-D 3.44.50 ISTAP 53.4.002 Software HDD with BMW Multilanguage update to 2014.11.It can support BMW all series diagnose and programming is now available in Eobd2 shop.

2014.11 Software version:
ISTA-D:3.45.40
ISTA-P:53.5.003
VIN: 2014.9.25

2014.11 BMW ICOM Software HDD language:
Chinese, English, German, Korean, Russian (More language will be added)
Latest software bmw icom
latest-software-bmw-icom-3
How to update ICOM firmware?

1. Connect BMW ICOM A2 device with computer via network cable while connect the ICOM A2 interface into the BMW OBD port to charge power supply.

2. Brose the IE Internet Exploer, launch : http://169.254.33.45:60080/, thean login with username/password: root/NZY1150263

3. Select and click “Update Firmware”, ICOM firmware version information will display on the program.

4. Open “ICOM-BootImage-01-13-00.bin” file and set image type to SYSTEM, click “Send the file”.

5. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.

6 Click “Update Firmware” button when “The SYSTEM IMAGE update was successful” notice pops out.

7. Select and open “ICOM-ApplicationImage-01-18-00.bin”, set image type to APPLICATION, click “Send the file”. The process will takes some time, please wait patiently.

8. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.
9 Click “Reboot” when the upgrade procedure is complete.

NOTE:
Set up your computer to obtain an IP address automatically. No network and also no connection with the original server when using the bmw icom software hdd, otherwise it will be damaged, and need you send back for repair.

Top 7 Reasons to Get V4.94 Digiprog 3

Good news,V4.94 Digiprog 3 new arrival on Eobd2.fr.V4.94 digiprog 3 is latest version of Digiprog 3, add more car models on the basic of V4.88. Digiprog 3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle.
newest-digiprog-iii-entire-kit-1
Top 7 Reasons to Get  V4.94 Digiprog 3 :

1. Newest Version: V4.94
2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
3. Worldwide leader in digital speedo programming and correction software.
4. Quality standards are second to none.
5.Years of experience in digital vehicle engineering.
6. Professional technical service.
7. Has ST01/02 and ST04 Adapter in the Package Already, No Need to Buy Them Alone

 Some Important Tips for Using Digiprog 3:

1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.

Product link:http://www.eobd2.fr/v4.94-digiprog3-odometer-master-programmer-entire-kit.html