Settled FAQs for XHORSE MVCI 3 In 1

Q1: How to recognize that XHORSE MVCI is an original one or a copy? (The most frequently asked question)
A: The below picture will concretely show you the answer.
mvci-original-pic
Q2: When finish MVCI HDS Program installation on Windows XP, it can read the DTC code, but it fails to clear DTC.

A: There may 3 things that you need to make respective confirmation:

1. There may exist poor contact between PC and the USB interface.
2. The problem may result from unsuccessful installation of MVCI HDS Driver.

If the above two reasons has been eliminated, there exists one result:

3. MVCI is not compatible with your car model.

Q3. I installed MVCI HDS software, and the green light flashes, the MVCI is activated, then I click the “select car model” button, MVCI starts to test, then proceed to the window of mileage and car model selection, I go on enter the list of subsystem and choose the subsystem, no response, all the PGM light, ABS light and SRS light flash, but Honda software prompts “No communication, please check whether the key is insert or MVCI is connected”

A: You can enter into the list of subsystem, it means MVCI can work, but it has no response after selecting the subsystem, it means MVCI can’t work with this car model, advice you select the other car model to diagnose or advice you use Honda HDS, GNA600 to diagnose Honda, HDS and GNA600 is best Honda diagnostic tool.

Q4: What you have to pay attention when using this tool?
A: 1. Your computer must be Windows XP operation system
2. Pls. choose area European when you install the software, and then it will not ask you for activation code.

More questions about XHORSE MVCI,feel free to contact:www.eobd2.fr .