7-in-1 Adblue Emulator User Guide

Before displaying how to use Adblue Emulator 7-in-1 tool, the meaning and function of Emulator 7-in-1 should be noted.

Adblue Emulator 7-in-1 is a top-rated truck Adblue remove tool. It covers large truck makes including trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates made by Mercedes-Benz, MAN, Scania, Iveco, DAF, Volvo and Renault. With the Adblue remove tool, vehicles will stop using Adblue liquid.

Adblue Emulator 7-in-1 is quite easy to use. There is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck. Following are main steps of using the obd2 tool.

Step 1
Connect AdBlue Emulator Box and insert CD came with the package to PC/laptop. Then install hardware and driver in the CD.

Step 2
Disconnect the box after complete driver installation. Put jumper on and connect 2 pins with each other. If the light on box shines, the connection is done and it is allowed to program.
Step 3
Take off the jumper on board. Reconnect the box with PC via USB cable. Find out and open truck-adlue-emu v5.exe setup located in adblue emulator box file.

Step 4
Select the specific truck model and click “Start” to run the routine. The orange light on later implies the process is completed.

Step 5
Finally, disconnect the USB cable and plug adblue programming adapter to the truck.

Note: If your are going to do it on another truck, just disconnect and install on another truck.

Here is the diagram to display how Adblue Emulator 7-in-1 works.