Digiprog III is EOBD2 2012 latest version odometer correction tool. Digiprog 3 odometer correction now is v4.82 version. While many customers try update it the minute they get it, the they may meet the problem–Digiprog III Blue/White Screen. How to solve Digiprog III Blue/White Screen problem?
Learn more about Newest Original YANHUA 4.88V Digiprog III Digiprog3 Odometer Master Programmer>>
Here are the fix of Digiprog III Blue/White Screen problem:
Usually, the Blue and white screen error of Digiprog 3 is caused by the following reason,
1. DigiProg 3 Voltage isn’t steady
When you connect the digiprog with the power (12V), if your voltage will not be steady, it’s going to also cause the blue display problem.
2. DigiProg 3 is updated?
Now newest version f digiprog 3 is V4.82. if some customer update the digiprog III(3),and some error, will cause blue screen of Digiprog 3.
Attention: please never update the digiprog 3 if you use it. Once latest software of digiprog III is released, we’ll release it on our website. Should you have to have update your device, please contact with us.
3. Digiprog 3 is destroyed around the method to you.
Before we send the solution out, we’ll test it. If digiprog 3 is crashed or extruded for the way, additionally, it meet blue screen issue.
then some customer will ask how to fix DigiProg III Blue Screen and White Screen problem?
Look at this photo, unscrew the pin U16 and U17 from the board, and Weld CY7C1049D onto the board at the same place.
If you do not know how to weld, please send the main unit back to us, we will help you weld it and fix the blue screen problem.